IWC Aquatimer Chronograph Reference 3768 Watch Operating Instructions

Normal Position
This watch has a screw-in crown. Screwing the crown in to its normal position (X) prevents the inadvertent adjustment of the time or date and also acts as a double seal to prevent water from seeping into the case. To release the crown, unscrew it by turning it to the left, where it automatically assumes position 0, the winding position. By depr essing the crown in position X and turning it to the right at the same time, it is screwed down firmly again and secured.

Winding Position
With the crown in the winding position (0), you can also wind the automatic movement by hand. A few revolutions of the crown are enough to start the movement. However, it is better to wind the watch by turning the crown through appr oximately 20 revolutions as this will ensure maximum accuracy. The crown must always be in position X when you are wearing your watch.

IWC Aquatimer Chronograph Reference 3768 Watch Operating Instructions ScreenshotFilename: IWE00968_REF3768_eu.pdf
Filesize: 3.8 MB
Filetype: pdf
In IWC Aquatimer Chronograph Watch Manual

Click this pic reload
(case insensitive) Click this pic reload
 
 
 
If you've enjoyed this site, why not share it with others by linking to us?
And we'd really appreciate it, just copy and paste the following code to link to this page::